Tripp Lite UPS Smart 500VA 300W Rackmount AVR 120V USB DB9 SNMP 1URM - 500 VA-300 W - 120 V AC - 3.20 Minute Stand-by Time - 1U Tower-Rack Mountable - 7 x NEMA 5-15R
MFG No: SMART500RT1U SKU No: A1NT9UQVAN UPC: 037332119247 MFG. Name: Tripp Lite Available: 117 Condition: New
Load Management Receptacles: One switchable single-outlet 5-15R load bank
Output AC Waveform (AC Mode): Sine wave
Output AC Waveform (Battery Mode): PWM sine wave
Nominal Output Voltage(s) Supported: 120V
Output Receptacles: (6) 5-15R
Individually Controllable Load Banks: Yes
Battery Type: Valve Regulated Lead Acid (VRLA)
Runtime Full Load (min.): 3 min. (300W)
Runtime Half Load (min.): 14 min. (150W)
DC System Voltage (VDC): 12
Battery Recharge Rate (Included Batteries): Less than 12 hours to 90%
Battery Access: Battery access door
Internal UPS Replacement Battery Cartridge: IMPORTANT BATTERY REPLACEMENT INFORMATION > Use Tripp Lite RBC12V-1U replacement battery for SMART500RT1U models with Series Number AG-03AA listed on the UPS nameplate (sold starting in 2021); For all prior versions of SMART500RT1U, use Tripp Lite RBC62-1U replacement battery; Contact Tripp Lite customer service for additional information
Battery Replacement Description: Hot-swappable, user replaceable batteries
Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 90 (r5%). Input voltage range of 90 to 139
Undervoltage Correction: Input voltages between 90 and 105 (r5%) are boosted by 14%
Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switch
Audible Alarm: Audible alarm indicates power-failure, overload and low-battery conditions
LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
EMI / RFI AC Noise Suppression: Yes
AC Suppression Joule Rating: 567
AC Suppression Response Time: Instantaneous
Primary Form Factor: Rackmount; Tower
Rack Height: 1U
Included Mounting Accessory Description: Included mounting brackets provide front-rail installation in 2 or 4 post racks, plus upright tower configurations
Installation Form Factors Supported with Included Accessories :2 post 19 inch rackmount; 2 post front mount; 4 post 19 inch rackmount; Tower
Minimum Required Rack Depth (inches): 15
Primary UPS Depth (mm): 286
Primary UPS Height (mm): 44
Primary UPS Width (mm): 440
Shipping Dimensions (hwd / in.): 4.20 x 15.70 x 21.30
Shipping Weight (lbs.): 19.12
UPS Housing Material: Steel
UPS Power Module Dimensions (hwd, in.): 1.73 x 17.32 x 11.26
UPS Power Module Weight (kg): 7.18
UPS Power Module Weight (lbs.): 15.84
Unit Weight (lbs.): 15.800
Operating Temperature Range: 32r to 104rF (0r to 40rC)
Storage Temperature Range: 5r to 122rF (-15r to 50rC)
Relative Humidity: 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load): 48
AC Mode Efficiency Rating (100% Load): 97%
AC Economy Mode Efficiency Rating (100% Load): 0.97
Operating Elevation (ft.): 6561 ft. (2000 m) above sea level
Audible Noise: 45 dBA maximum, front side 1m
Network Management Cards: WEBCARDLX
Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
PowerAlert Software: For local monitoring via the UPSrs built-in communication ports, download PowerAlert software at https://tripplite.eaton.com/products/power-alert
Communications Cable: USB and DB9 cabling included
WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
Communications Interface: DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
Transfer Time: 4-6 ms typical ( < 10 ms max)
Low Voltage Transfer to Battery Power (Setpoint): 90
High Voltage Transfer to Battery Power (Setpoint): 139
Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
High Availability UPS Features: Auto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage Regulation (AVR); Hot swappable batteries; Remote management; Surge/noise protection
Grounding Details: Back panel grounding lug
UPS Applications: High-End Desktop/Small Network; Retail/Point of Sale; Hospitality
Product Certifications: CSA (Canada); NOM (Mexico); UL 1778
Product Compliance: RoHS; ENERGY STAR Qualified
Product Warranty Period (Worldwide): 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
Voltage compatibility - 120V AC Frequency compatibility - 60 Hz Output volt amp capacity (VA) - 500 , Output watt capacity (watts) - 300 , Output nominal voltage - 120V AC Output voltage regulation - LINE MODE---Sine wave line voltage 120V (below 15 percent or above 13 percent) , BATTERY MODE---Inverter output regulated to 60Hz above or below 1Hz Outlet quantity / type - 7 NEMA 5-15R Customized load management receptacles - Includes single-outlet load bank that supports automated load shedding and remote reboot on demand of locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices. Overload protection - Via 15A input breaker Maximum input amps - 5.6A Input connection type - NEMA 5-15P Input cord length - 10 ft., 14 gauge, Black Recommended electrical service - 15A 120V BATTERY - Full load runtime---5 minutes (500VA) , Half load runtime---17 minutes (250VA) , DC system voltage---12 VDC , Typical battery lifespan---3-6 years, depending on usage , Battery recharge rate---2-4 hours to 90 percent Replacement Battery Cartridge - RBC62-1U Voltage regulation description - Line interactive voltage regulation system corrects brownouts as low as 90 volts back to usable 120V nominal levels Brownout correction - Input voltages between 90 and 108 are boosted by 14 percent Front panel LEDs - 5 front panel LEDs - green POWER LED, green AVR LED, 3-color BATTERY CHARGE LED, 3-color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. Alarms - Audible alarm warns of power failure, overload, UPS fault and low battery conditions Switches - Includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions AC surge suppression - 480 joules AC suppression response time - Instantaneous
Other people marked this product with these tags:
Tripp Lite UPS Smart 500VA 300W Rackmount AVR 120V USB DB9 SNMP 1URM - 500 VA-300 W - 120 V AC - 3.20 Minute Stand-by Time - 1U Tower-Rack Mountable - 7 x NEMA 5-15R