Get reliable protection with the Tripp Lite Tower/Rack Mountable UPS. It's suitable for servers and network equipment. The Tripp Lite rack mountable UPS allows your business to operate during blackouts and surges without the need for transfer time. It also reduces the risk of data loss in the event of a spontaneous power outage, allowing you ample amount of time to save any file that you may be working on. It has an interactive LCD interface that reports the current UPS operating mode, detailed UPS and site-power data. It also supports a variety of UPS setup and configuration options. This unit maintains regulated output power by continuously converting raw AC input to DC, then re-converting output back to AC.
OUTPUT
Output Volt Amp Capacity (VA):1000
Output kVA capacity (kVA):1
Output Watt Capacity (watts):900
Output power factor:0.9
Output Capacity Details:ON LINE MODE: Maximum output capacity ratings are reduced for some nominal voltage settings (127/120/115/110V 900 watts, 100V 810 watts). FREQUENCY REGULATION / CONVERSION MODE: Maximum output ratings are reduced in frequency regulation / conversion mode (127/120/115/110V 630 watts / 100V 567 watts). Crest Factor:3:1
Nominal Output Voltage(s) Supported:100V 110V 115V 120V 127V
Nominal Voltage details:120V factory-default nominal voltage
Frequency compatibility:50/60 Hz (auto-selectable) Supports 50 to 60 Hz and 60 to 50 Hz conversion
Output voltage regulation (line mode):+/- 2%
Output voltage regulation (Economy line mode):+/- 10%
Output voltage regulation (Battery mode):+/- 3%
Built-in UPS output receptacles:6 5-15R outlet(s)
Built-in controllable switched load banks:Two switchable single-outlet 5-15R load banks
Output AC waveform (AC mode):Pure Sine wave
Output AC waveform (battery mode):Pure Sine wave INPUT
Rated input current (at maximum load):8.6A
Nominal Input Voltage(s) Supported:100V AC 110V AC 115V AC 120V AC 127V AC
Nominal input voltage description:120V factory default
UPS input connection type:5-15P
Input circuit breaker:15A
UPS Input cord length (ft.):10
UPS Input cord length (m):3
Recommended Electrical Service:15A 120V BATTERY
Full load runtime (minutes):4.8 min. (900w)
Half load runtime (minutes):14 min. (450w)
Expandable battery runtime:Extended runtime supported via optional external battery packs
External battery pack compatibility:BP24V15RT2U (limit 1) BP24V28-2U (limit 1) BP24V70-3U (multi-pack compatible)
Expandable runtime description:Some external battery configurations require the use of Tripp Lites External Battery Configuration Software, see manual for details
DC system voltage (VDC):24
Battery recharge rate (included batteries):Less than 3 hours recharge to 90%
Replacement battery cartridge (internal UPS battery replacement):RBC24V-LCD
Battery Access:Front panel battery access
Battery replacement description:Hot-swappable, user replaceable batteries VOLTAGE REGULATION
Voltage regulation description:Online, double-conversion power conditioning maintains 2% output voltage regulation during brownouts and overvoltages
Overvoltage correction:Corrects overvoltages to 150V (0-100% load)
Undervoltage correction:Corrects undervoltages to 100V at full load (90V at 100V nominal)
Severe undervoltage correction:Corrects brownouts to 70V (70% load) 55V (33% load) LEDS ALARMS and SWITCHES
LED Indicators:7 front panel LEDs indicate line power availability, AC to DC conversion, battery mode operation, inverter mode, eco mode operation, bypass mode operation and AC output status
Front panel LCD display:Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options
Alarms:Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Alarm cancel operation:Power-fail alarm can be temporarily silenced using alarm-cancel switch silent mode alarm configuration option available
Switches:2 switches control off/on power status and alarm-cancel operation 2 additional scroll-down and scroll-up / select options enable LCD status viewing and configuration options SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating:570
UPS AC suppression response time:Instantaneous
UPS Dataline suppression:1 line TEL/DSL (1 in / 1 out) 10/100Base T Ethernet
EMI / RFI AC noise suppression:Yes COMMUNICATIONS
Communications interface:USB (HID enabled) DB9 Serial Contact closure EPO (emergency power off) Slot for SNMP/Web interface
Network monitoring port description:Supports detailed monitoring of UPS and site power conditions DB9 port supports RS232 and contact closure communications
PowerAlert software:Included
Communications cable:USB and DB9 cabling included
WatchDog compatibility:Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER
Transfer time:Zero (0 milliseconds) in double-conversion mode 4 milliseconds economy mode
Low voltage transfer to battery power (setpoint):100V at full load (90V full load at 100V nominal setting) 70V at 70% load 55V at 33% load
High voltage transfer to battery power (setpoint):150

CERTIFICATIONS
UPS Certifications:Tested to UL1778 (USA) Tested to CSA (Canada) Meets FCC Part 15 Category B (EMI) ROHS (Restriction of Hazardous Substances) Item Dimension (L"xW"xH"):
24 x 20 x 9.5

Weight:
41.5 lb

Warranty Information:
2 Years