1U rack-mount UPS offers complete power protection for small network applications, including telecom, security and digital signage.

• UPC Code: 037332119247
• UPS Type: Line-Interactive
• Input Phase: Single-Phase
• Rated input current (Maximum Load): 10A
• Nominal Input Voltage(s) Supported: 120V AC
• UPS Input Connection Type: 5-15P
• Input Circuit Breakers: 10A
• UPS Input Cord Length (ft.): 10
• Recommended Electrical Service: 15A 120V
• Output Capacity (VA): 500
• Output Capacity (kVA): 0.5
• Output Capacity (Watts): 300
• Output Capacity (kW): 0.3
• Output Capacity Details: 4.2A @ 120V. (LINE MODE) 120% @ 5 minutes; (BATTERY MODE) 120% @ 5 seconds
• Power Factor: 0.6
• Nominal Voltage Details: 120V sinusoidal in line mode and 120V PWM in battery mode
• Frequency Compatibility: 60 Hz
• Frequency Compatibility Details: Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal.
• Output Voltage Regulation (Line Mode): -14%, +16%
• Output Voltage Regulation (Battery Mode): +/- 5%
• UPS Output Receptacles (Surge Suppression Only): 5 UPS outlets, 1 surge-only outlet
• Load Management Receptacles: One switchable single-outlet 5-15R load bank
• Output AC Waveform (AC Mode): Sine wave
• Output AC Waveform (Battery Mode): PWM sine wave
• Nominal Output Voltage(s) Supported: 120V
• Output Receptacles: (6) 5-15R
• Individually Controllable Load Banks: Yes
• Battery Type: Valve Regulated Lead Acid (VRLA)
• Runtime Full Load (min.): 3 min. (300W)
• Runtime Half Load (min.): 14 min. (150W)
• DC System Voltage (VDC): 12
• Battery Recharge Rate (Included Batteries): Less than 12 hours to 90%
• Battery Access: Battery access door
• Internal UPS Replacement Battery Cartridge: IMPORTANT BATTERY REPLACEMENT INFORMATION > Use Tripp Lite RBC12V-1U replacement battery for SMART500RT1U models with Series Number AG-03AA listed on the UPS nameplate (sold starting in 2021); For all prior versions of SMART500RT1U, use Tripp Lite RBC62-1U replacement battery; Contact Tripp Lite customer service for additional information
• Battery Replacement Description: Hot-swappable, user replaceable batteries
• Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 90 (r5%). Input voltage range of 90 to 139
• Undervoltage Correction: Input voltages between 90 and 105 (r5%) are boosted by 14%
• Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation
• Alarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switch
• Audible Alarm: Audible alarm indicates power-failure, overload and low-battery conditions
• LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
• EMI / RFI AC Noise Suppression: Yes
• AC Suppression Joule Rating: 567
• AC Suppression Response Time: Instantaneous
• Primary Form Factor: Rackmount; Tower
• Rack Height: 1U
• Included Mounting Accessory Description: Included mounting brackets provide front-rail installation in 2 or 4 post racks, plus upright tower configurations
• Installation Form Factors Supported with Included Accessories :2 post 19 inch rackmount; 2 post front mount; 4 post 19 inch rackmount; Tower
• Minimum Required Rack Depth (inches): 15
• Primary UPS Depth (mm): 286
• Primary UPS Height (mm): 44
• Primary UPS Width (mm): 440
• Shipping Dimensions (hwd / in.): 4.20 x 15.70 x 21.30
• Shipping Weight (lbs.): 19.12
• UPS Housing Material: Steel
• UPS Power Module Dimensions (hwd, in.): 1.73 x 17.32 x 11.26
• UPS Power Module Weight (kg): 7.18
• UPS Power Module Weight (lbs.): 15.84
• Unit Weight (lbs.): 15.800
• Operating Temperature Range: 32r to 104rF (0r to 40rC)
• Storage Temperature Range: 5r to 122rF (-15r to 50rC)
• Relative Humidity: 0 to 95%, non-condensing
• AC Mode BTU / Hr. (Full Load): 48
• AC Mode Efficiency Rating (100% Load): 97%
• AC Economy Mode Efficiency Rating (100% Load): 0.97
• Operating Elevation (ft.): 6561 ft. (2000 m) above sea level
• Audible Noise: 45 dBA maximum, front side 1m
• Network Management Cards: WEBCARDLX
• Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
• PowerAlert Software: For local monitoring via the UPSrs built-in communication ports, download PowerAlert software at https://tripplite.eaton.com/products/power-alert
• Communications Cable: USB and DB9 cabling included
• WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
• Network Management Card Description: Network management card optional
• Communications Interface: DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
• Transfer Time: 4-6 ms typical ( < 10 ms max)
• Low Voltage Transfer to Battery Power (Setpoint): 90
• High Voltage Transfer to Battery Power (Setpoint): 139
• Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
• High Availability UPS Features: Auto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage Regulation (AVR); Hot swappable batteries; Remote management; Surge/noise protection
• Grounding Details: Back panel grounding lug
• UPS Applications: High-End Desktop/Small Network; Retail/Point of Sale; Hospitality
• Product Certifications: CSA (Canada); NOM (Mexico); UL 1778
• Product Compliance: RoHS; ENERGY STAR Qualified
• Product Warranty Period (Worldwide): 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
• Connected Equipment Insurance (U.S., Canada & Puerto Rico): $250,000 Ultimate Lifetime Insurance

Voltage compatibility - 120V AC Frequency compatibility - 60 Hz Output volt amp capacity (VA) - 500 , Output watt capacity (watts) - 300 , Output nominal voltage - 120V AC Output voltage regulation - LINE MODE---Sine wave line voltage 120V (below 15 percent or above 13 percent) , BATTERY MODE---Inverter output regulated to 60Hz above or below 1Hz Outlet quantity / type - 7 NEMA 5-15R Customized load management receptacles - Includes single-outlet load bank that supports automated load shedding and remote reboot on demand of locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices. Overload protection - Via 15A input breaker Maximum input amps - 5.6A Input connection type - NEMA 5-15P Input cord length - 10 ft., 14 gauge, Black Recommended electrical service - 15A 120V BATTERY - Full load runtime---5 minutes (500VA) , Half load runtime---17 minutes (250VA) , DC system voltage---12 VDC , Typical battery lifespan---3-6 years, depending on usage , Battery recharge rate---2-4 hours to 90 percent Replacement Battery Cartridge - RBC62-1U Voltage regulation description - Line interactive voltage regulation system corrects brownouts as low as 90 volts back to usable 120V nominal levels Brownout correction - Input voltages between 90 and 108 are boosted by 14 percent Front panel LEDs - 5 front panel LEDs - green POWER LED, green AVR LED, 3-color BATTERY CHARGE LED, 3-color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. Alarms - Audible alarm warns of power failure, overload, UPS fault and low battery conditions Switches - Includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions AC surge suppression - 480 joules AC suppression response time - Instantaneous