This SmartPror Line-Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line-Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. This unique configuration excels in exceptionally poor power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98-percent line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card.The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and macOS. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available for free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rack-mount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
UPC Code: 037332177902
UPS Type: Line-Interactive
Input Phase: Single-Phase
Rated input current (Maximum Load): 24A
Nominal Input Voltage(s) Supported: 120V AC
UPS Input Connection Type: L5-30P
UPS Input Cord Length (ft.): 10
Recommended Electrical Service: 30A 120V
Output Capacity (VA): 3000
Output Capacity (kVA): 3
Output Capacity (Watts): 2250
Output Capacity (kW): 2.25
Power Factor: 0.75
Nominal Voltage Details: 120v nominal output in battery mode
Frequency Compatibility: 60 Hz
Output Voltage Regulation (Line Mode): -14%, +6%
Output Voltage Regulation (Battery Mode): +/- 5%
Load Management Receptacles: Two switchable single-outlet load banks
Output Circuit Breakers: Two 20A output breakers protect 4 5-15/20R outlets each
Battery Replacement Description: Hot-swappable, user replaceable batteries
Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction: Input voltages between 127 and 145 are reduced by 12%
Undervoltage Correction: Input voltages between 108 and 96 are boosted by 12%
Severe Undervoltage Correction: Input voltages between 83 and 95 are boosted by 24%
Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches: 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset
Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
LED Indicators: Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec).
UPS AC Suppression Joule Rating: 570
UPS AC Suppression Response Time: Instantaneous
EMI / RFI AC Noise Suppression: Yes
Primary Form Factor: Rackmount
Rack Height: 2U
Cooling Method: Fan
Included Mounting Accessory Description: Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
Installation Form Factors Supported with Included Accessories: 4 post 19 inch rackmount
Installation Form Factors Supported with Optional Accessories: 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )
Minimum Required Rack Depth (inches): 23
Minimum Required Rack Depth with External Battery Pack (cm): 67
Minimum Required Rack Depth with External Battery Pack (in.): 26.5
Minimum Required Rack Depth without External Battery Pack (cm): 62
Minimum Required Rack Depth without External Battery Pack (in.): 24.5
Optional Mounting Accessory Notes: Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support
Primary UPS Depth (mm): 494
Primary UPS Height (mm): 87
Primary UPS Width (mm): 440
Shipping Dimensions (hwd / in.): 8.80 x 23.90 x 22.20
Shipping Weight (lbs.): 79.28
UPS Housing Material: Steel
UPS Power Module Dimensions (hwd, in.): 3.43 x 17.32 x 19.46
UPS Power Module Weight (kg): 28.49
UPS Power Module Weight (lbs.): 62.8
Unit Dimensions (hwd / in.): 3.430 x 17.320 x 19.460
Unit Weight (lbs.): 62.800
Operating Temperature Range: 32r to 104rF (0r to 40rC)
Storage Temperature Range: 5r to 122rF (-15r to 50rC)
Relative Humidity: 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load): 189
Battery Mode BTU / Hr. (Full Load): 1356
AC Mode Efficiency Rating (100% Load): 98%
Audible Noise: 45 dBA maximum, front side 1m
Network Management Cards: WEBCARDLX
Network Monitoring Port DescriptionIncludes pre-installed WEBCARDLX Network Management Card interface
PowerAlert Software: For local monitoring via the UPSrs built-in Serial or USB communication ports, download PowerAlert software at https://tripplite.eaton.com/products/power-alert. LX Platform Interface: PowerAlert Device Manager 20 (PADM20)
Communications Cable: Micro-USB, USB, and DB9 cabling included
WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network Monitoring Port: RJ45 Network port, Micro-USB Configuration/Console port, USB A port supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules.
EPO Port: RJ11 interface jack with 4-meter cable included. Supports normally open and normally closed EPO systems
SNMP Compatibility: SNMP V1, V2c, V3
Network UPS Tools (NUT) Compatibility: NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.htmlrmanufacturer=Tripp%20Lite
Network Compatibility: 100 Mbps (Fast Ethernet)
Network Management Card DescriptionNetwork management card included
Communications Interface: DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface; USB (HID enabled)
Transfer Time: 5 milliseconds (AC to battery); 1 millisecond (battery to AC)
Low Voltage Transfer to Battery Power (Setpoint): 83
High Voltage Transfer to Battery Power (Setpoint): 145
Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
High Availability UPS Features: Auto Probe Monitoring and Reboot (included); Automatic Voltage Regulation (AVR); Hot swappable batteries; Remote management; Surge/noise protection
Green Energy-Saving Features: Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
Grounding Details: Includes back panel grounding lug
UPS Applications: Large Network
Product Certifications: CSA (Canada); NOM (Mexico); UL 1778
Product Compliance: RoHS; FCC Part 15 Class A (USA)
Product Warranty Period (Worldwide): 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
