Specifications

• Mfr Part Number: X11SSL-F-B
• CPU: LGA1151
  • Supports Intel Xeon E3-1200 v5 Processor
  • Supports 6th Generation Intel Core i3/ Pentium/ Celeron Processors
  • Support up to 80W TDP
• Chipset: Intel C232
• Memory: 4x 288pin DDR4-2133/ 1866/ 1600 DIMM Slots, ECC, Unbuffered, Max Capacity of 64GB
• Slots: 1x PCI-Express 3.0 x16 Slot (runs at x8), 2x PCI-Express 3.0 x8 Slot (one runs at x4)
• SATA: 6x SATA3 Ports, Support RAID 0, 1, 5, 10
• Video: ASPEED AST2400 BMC Graphics
• LAN: Dual Intel I210-AT Gigabit Ethernet Controllers
• Ports: 5x USB 3.0 Ports (2 rear, 2 via header, 1 Type A), 6x USB 2.0 Ports (2 rear, 4 via headers), 1x VGA Port, 1x Serial Port, 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port
• Form Factor: MicroATX, 9.6 x 9.6 inch / 24.4 x 24.4 cm
• RoHS Compliant

Physical Stats
Form Factor
Micro-ATX Processor/Cache
CPU
Intel 7th/6th Generation Core i3 series, Intel Celeron, Intel Pentium, Intel Xeon processor E3-1200 v6/v5.
Single Socket H4 (LGA 1151) supported, CPU TDP support 80W
Note
BIOS version 2.0 or above is required to support 7th Generation Intel Core i3 Processors and Intel Xeon Processor E3-1200 v6 series System Memory
Memory Capacity
64GB Unbuffered ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
Memory Type
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes
4GB, 8GB, 16GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors On-Board Devices
Chipset
Intel C232
SATA
Intel C232 controller for 6 SATA3 (6 Gbps) ports RAID 0,1,5,10
IPMI
ASPEED AST2400 BMC
Network Controllers
Dual LAN with Intel Ethernet Controller I210-AT
Graphics
Aspeed AST2400 BMC Input / Output
USB
6 USB 2.0 ports (2 rear + 4 headers)
5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
Video Output
1 VGA port
Serial Port / Header
1 COM Port (1 rear)
TPM
TPM Header Expansion Slots
PCI-E
1 PCI-E 3.0 x8 (in x16 slot),
1 PCI-E 3.0 x8,
1 PCI-E 3.0 x4 (in x8 slot) System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
ACPI 1.0 / 2.0 / 3.0 / 4.0
APM 1.2
DMI 2.3
Hardware BIOS Virus protection
PCI 2.3
Plug and Play (PnP)
SMBIOS 2.7.1
UEFI 2.3.1
USB Keyboard support Management
Software
IPMI2.0, NMI, SSM, SUM, SuperDoctor 5, Watchdog
Power Configurations
ACPI Power Management
Power-on mode for AC power recovery PC Health Monitoring
Voltage
+12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
FAN
5x 4-pin fan headers (up to 5 fans), Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors
Temperature
Thermal Monitor 2 (TM2) support, PECI, Monitoring for CPU and chassis environment, CPU thermal trip support
LED
UID/Remote UID, CPU / System Overheat LED
Other Features
Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, WOL Operating Environment
Operating Temperature Range
0^oC - 50^oC (32^oF - 122^oF)
Non-Operating Temperature Range
-40^oC - 70^oC (-40^oF - 158^oF)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing) Item Dimension (L"xW"xH")
NA

Weight
3 lbs

Warranty Information
5 Years