General InformationExtend your high-speed wireless coverage to the outdoors with the high-powered ENH1350EXT, a Wave 2 Outdoor 11ac, 2x2, MU-MIMO, Dual-Band Wireless AC1300 Access Point. Reaching speeds to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4 GHz frequency band, this feature-rich AP leverages advanced Wi-Fi and Beamforming antenna technology, maximizing performance and reliability while greatly increasing outdoor network user capacities. The AP is designed to operate in harsh environmental conditions and includes an IP67-rated waterproof and dustproof casing to protect it from the elements. 11ac Wave 2 Wireless Speeds to 867Mbps on 5GHz; to 400Mbps on 2.4GHz IP67-Rated Weatherproof & Dustproof Housing Withstands Harsh Environments Dual-Radio MU-MIMO Improves Performance & Expands User Capacities Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients Four (4) Detachable 5dbi High-Gain, 360 SMA-Type Antennas Technical InformationWireless LAN Standard: IEEE 802.11acFrequency Band: 2.40 GHzFrequency Band: 5 GHzTotal Number of Antennas: 4Number of External Antennas: 4Wireless Transmission Speed: 1.27 Gbit/sMIMO Technology: YesBeamforming Technology: YesInterfaces/PortsEthernet Technology: Gigabit EthernetNumber of Network (RJ-45) Ports: 1PoE PD Port: YesVGA: NoHDMI: NoPowerline: NoManagement Port: YesPhysical CharacteristicsForm Factor: Wall MountableForm Factor: Pole-mountableHeight: 1.2"Width: 4.4"Depth: 6.8"Weight (Approximate): 10.40 ozMiscellaneousPackage Contents: EnTurbo AC1300 Wave 2 Outdoor Access Point 1 x Power Adapter (54V/0.6A) 1 x PoE Adapter (EPA5006GR) 2 x Pole-Mounting Brackets 1 x Wall-Mount Screw Set 2 x 2.4GHz 5dBi SMA Antennas 2 x 5GHz 5dBi SMA Antennas 1 x Power Cord 1 x Quick Installation Guide Environmentally Friendly: YesEnvironmental Certification: WEEEWarrantyLimited Warranty: 1 Year
Standards
IEEE 802.11b/g/n on 2.4GHz
IEEE802.11a/n/ac on 5GHz Antenna
Four (4) External 5 dBi Dual-Concurrent Omni-Directional Antenna
SMA-Type Physical Interface
1 x 10/100/1000 Gigabit Ethernet Port
1 x Reset Button LED Indicators
1 x Power
1 x LAN 1
1 x 2.4 GHz
1 x 5 GHz Power Source
Power-over-Ethernet: Proprietary 48V PoE
IEEE 802.11e Compliant Source
Active Ethernet (PoE) Maximum Power Consumption
12.6W Surge Protection
1KV ESD Protection
Contact: 4KV
Air: 8 KV Wireless and Radio Specifications
Operating Frequency
Dual-Radio Concurrent 2.4GHz and 5 GHz Operation Modes
Access Point Mode (AP Mode)
Client Bridge Mode (CB Mode)
WDS: AP Mode and Bridge Mode
Mesh Mode (Coming Soon) Frequency Radio
2.4GHz: 2400 MHz to 2835 MHz
5GHz: 5150 MHz to 5250 MHz, 5250 MHz to 5350 MHz, 5470 MHz to 5725 MHz, 5725MHz to 5850MHz Transmit Power
2.4 GHz: 23 dBm
5 GHz: 23 dBm Tx Beamforming (TxBF)
Radio Chains/Spatial Stream
2x2:2 SU-MIMO
Two (2) Spatial Stream SU-MIMO up to 1267 Mbps to a single client MU-MIMO
Two (2) Spatial Stream MU-MIMO up to 1267 Mbps to two (2) MU-MIMO capable wireless devices simultaneously Supported Data Rates (Mbps):
2.4 GHz: Max 400
5 GHz: Max 867
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS equal 1 to 2) Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 Streams Channelization
802.11ac supports very high throughput (VHT)-VHT 20/40/80 MHz
802.11n supports high throughput (HT)-HT 20/40 MHz
802.11n supports very high throughput (VHT) under the 2.4 GHz radio-VHT (256-QAM)
802.11n/ac packet aggregation: AMPDU, ASPDU Supported Modulation
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Management
Multiple BSSID
Supports 16 SSIDs (8 SSIDs per band)