5IN INDOOR/OUTDOOR LOUDSPEAKER
Manufacturer Part Number: Control 25-1
Highlights
JBL's Contractor Series surface-mount speakers are loaded with complication-reducing innovations. Rugged molded high-impact polystyrene (HIPS) enclosures balance mass, strength, and resonance, perfectly complementing their respective transducers. The symmetrical 100° x 100° dispersion geometry delivers precise directability and control. Compact design dimensions and textured, ready-to-paint exterior surfaces make the Control Contractor Series unobtrusive in any decor. JBL's Invisiball mounting system (patent pending), innovative bracketing solutions, and factory-installed autoformers take the headaches out of installation.
Extensive use of high-tech materials adds years to speaker life expectancy while increasing weather resistance. The Control 25-1 exceeds MilSpec 810 for humidity, salt-spray, temperature & UV, and passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. For extreme environments, MTC-23WMG-1 WeatherMax grilles and MTC-PC2 protective panel covers (both sold separately) may be added to increase the IEC rating from IP-44 to IP-55.
Specifications: Frequency range(-10 dB): 60 - 20,000 Hz Frequency response (±3 dB): 85 - 17,000 Hz Power rating (8 ohm setting): 200W continuous program Maximum input voltage: 23.3 Vrms; 50.6 peak Maximum SPL: 110 dB avg; 116 dB peak Sensitivity: 90 dB 1W/1m (avg., 100 - 10kHz) Coverage angle: 100° x 100° Directivity factor (Q): 6.04 (avg. 1kHz - 16kHz) Directivity index (DI): 7.6 dB (avg. 1kHz - 16kHz) Tap settings: (70V) 30W, 15W, 7.5W, 3.7W; (100V) 30W, 15W, 7.5W THRU setting: 8 ohms nominal Recommended high-pass protection: 60 Hz, 24 dB/oct Termination: screw-down terminal strip Dimensions: 9.6" x 7.4" x 5.7" (243 x 188 x 145 mm) Weight (per speaker): 7.5 lbs. (3.4 kg) Sold in pairs.
JBL CONTROL 25-1 LOUDSPEAKER