Ports
Switch Ports:
48 x 25G SFP28 plus 6 x 100G QSFP28 ports:
Each SFP28 supports 1 x 10 G or 25 GbE
Each QSFP28 supports 1x40/100 GbE or 4 x 25 GbE or
4 x 10 GbE per port using splitter cables
Management ports on port side:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage
Key Componets
Switch Silicon: Broadcom BCM56967 Tomahawk+
No PHYs, No Retimers
CPU Modules:
DDR3: 8 GB x 2 SO-DIMM with ECC
SPI NOR Flash: 8 MB x 2
mSATA: 32 GB MLC
Performance
Switching Capacity: 3.6 Tbps full duplex
Forwarding Rate: 2.6 Bpps
Jumbo frames support up to 9216 Bytes
Packet Buffer Size: 22 MB integrated packet buffer
Subject to NOS:
MAC Addresses: 8K min./136K max.
VLAN IDs: 4 K
IPv4/32: 16 K L3 LPM entries with TCAM-only mode
IPv6/64: 8 K L3 LPM entries with TCAM-only mode
IPv6/128: 4 K L3 LPM entries with TCAM-only mode
Software
Diagnostics
Compatible with the following NOS options:
Open Network Linux, the open-source, OCP reference NOS
Compatible with Cumulus Linux r3.6 and later version
Compatible with PicOS from Pica8 Inc
LEDs
10G SFP+ Port LEDs: Link Speed, Link Status, Activity
25G SFP28 Port LEDs: Link Status, Activity for 25G status
100G QSFP28 Port LEDs: Link Status, Activity for 100G status
100G QSFP28 Breakout LEDs: show Link, Status, Activity
with 4 x 25G breakout
Ethernet Management Port LED: Link Status, Activity
System LEDs: Diagnostic, Locator, PSU and Fan Status
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC or -48 VDC
Input Voltage: 90 to 240 VAC at 50-60 Hz. -36 to -72 VDC
PSU Efficiency: Up to 93% for AC PSUs
Power input option: 12 VDC
The total estimated power budget is around 511 W
Item Dimension (L inchxW inchxH inch)
18 x 19 x 2 Weight
20.78lb Warranty Information
3 Year