Get reliable protection with the Tripp Lite Smart2200RMXL2U SmartOnline 2200VA Tower/Rack Mountable UPS. It's suitable for servers and network equipment. The Tripp Lite SMART2200RMXL2U UPS allows your business to operate during blackouts and surges without the need for transfer time. It also reduces the risk of data loss in the event of a spontaneous power outage, allowing you an ample amount of time to save any file that you may be working on. It has an interactive LCD interface that reports the current UPS operating mode, detailed UPS and site-power data. It also supports a variety of UPS setup and configuration options. This unit maintains regulated output power by continuously converting raw AC input to DC, then re-converting output back to AC.

Output Volt Amp Capacity (VA)
2200 Output kVA capacity (kVA)
2.2 Output Watt Capacity (watts)
1800 Output kW capacity
1.8 Output power factor
0.82 Output Capacity Details
ON LINE MODE: Maximum output capacity ratings are reduced for some nominal voltage settings (127/120V 1800 watts / 115V 1620 watts / 110V 1530 watts / 100V 1440 watts). FREQUENCY REGULATION / CONVERSION MODE: Maximum output ratings are reduced in frequency regulation / conversion mode (127/120V 1260 watts / 115V 1134 watts / 110V 1071 watts / 100V 1008 watts) Crest Factor
3:1 Nominal Output Voltage(s) Supported
100V 110V 115V 120V 127V Nominal Voltage details
120V factory-default nominal voltage Frequency compatibility
50/60 Hz (auto-selectable) Supports 50 to 60 Hz and 60 to 50 Hz conversion Frequency compatibility details
ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup Output matches input frequency when +/-5Hz of nominal Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency input is 40 to 70Hz UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output is regulated to +/-0.05Hz. Output voltage regulation (line mode)
+/- 2% Output voltage regulation (Economy line mode)
+/- 10% Output voltage regulation (Battery mode)
+/- 3% Built-in UPS output receptacles
6 5-15/20R outlet(s) 1 L5-20R outlet(s) Built-in controllable switched load banks
Two switchable three-outlet 5-15/20R load banks Output AC waveform (AC mode)
Pure Sine wave Output AC waveform (battery mode)
Pure Sine wave INPUT
Rated input current (at maximum load)
16A
Nominal Input Voltage(s) Supported
100V AC 110V AC 115V AC 120V AC 127V AC
Nominal input voltage description
120V factory default
UPS input connection type
5-20P
Input circuit breaker
30A
UPS Input cord length (ft.)
10
UPS Input cord length (m)
3
Recommended Electrical Service
20A 120V BATTERY
Full load runtime (minutes)
4 min. (1800w)
Half load runtime (minutes)
12 min. (900w)
Expandable battery runtime
Extended runtime supported via optional external battery packs
External battery pack compatibility
BP48V24-2U (limit 1)
Expandable runtime description
Some external battery configurations require the use of Tripp Lites External Battery Configuration Software, see manual for details
DC system voltage (VDC)
48
Battery recharge rate (included batteries)
Less than 3 hours recharge to 90%
Replacement battery cartridge (internal UPS battery replacement)
RBC94-2U
Battery Access
Front panel battery access
Battery replacement description
Hot-swappable, user replaceable batteries